Now Accepting Box Orders

[Ami Creations]

All PM's replied

[83formula]

I have a box for you if you send me one free

[Type_X]

Originally Posted by 83formula I have a box for you if you send me one free

come on now, keep the bs in wot

[sub-standard]

Originally Posted by benahn7 i would like to see somone selling plans. if somone like Ami creations or some of the other members of this forum wanted to sell plans for a box tuned and ported with all the specs i would bet they would get plenty of bussiness. i know having the right table saw and skills to use it are very important. i would glady pay for box plans because i dont want to spend the time on box calculations. i am going to be building a box for two 80lb level 5s 15cf or 16cf not sure yet but anyways the shiping on that box from a builder is crazy and who knows what the shiper would do to it on the way.

I really don't think that thats something people should have to pay for. I mean If they want you to design it, cut the pieces, AND ship them so that all that they have to do is put it togeather then yes, I would charge them for that. But if some one is new car audio & is willing to try building a box themself & just need some coaching for the first time or two, then most people on here don't mind helping out http://caraudioforum.com/showthread.php?t=323305 .

Now for some one like yourself that has been around car audio for awhile (Yes, I guess you screwing stuff up does count as experience) admits that they are just too lazy to figure it out yourself & would rather pay someone else to do it, then I guess there would be a few customers like you. But for the most part if someone just needs a design for simple enclosure build, I have seen several people on here offer that free of charge.

[eaglesguy1981]

Originally Posted by sub-standard I really don't think that thats something people should have to pay for. I mean If they want you to design it, cut the pieces, AND ship them so that all that they have to do is put it togeather then yes, I would charge them for that. But if some one is new car audio & is willing to try building a box themself & just need some coaching for the first time or two, then most people on here don't mind helping out http://caraudioforum.com/showthread.php?t=323305 . Now for some one like yourself that has been around car audio for awhile (Yes, I guess you screwing stuff up does count as experience) admits that they are just too lazy to figure it out yourself & would rather pay someone else to do it, then I guess there would be a few customers like you. But for the most part if someone just needs a design for simple enclosure build, I have seen several people on here offer that free of charge.

In that case I could use the help. Ive always bought prefab boxes of the ebay. Im working with 2 Diamond D3 15s. Id like slot port with about 3 cubes per sub tuned in the low 30s. Can you help. I got the tools but never really did understand it.

[roxj]

sent you an email

[Ami Creations]

Originally Posted by roxj sent you an email

Replied..................

[sandt38]

Originally Posted by sub-standard I really don't think that thats something people should have to pay for. I mean If they want you to design it, cut the pieces, AND ship them so that all that they have to do is put it togeather then yes, I would charge them for that. But if some one is new car audio & is willing to try building a box themself & just need some coaching for the first time or two, then most people on here don't mind helping out http://caraudioforum.com/showthread.php?t=323305 . Now for some one like yourself that has been around car audio for awhile (Yes, I guess you screwing stuff up does count as experience) admits that they are just too lazy to figure it out yourself & would rather pay someone else to do it, then I guess there would be a few customers like you. But for the most part if someone just needs a design for simple enclosure build, I have seen several people on here offer that free of charge.

Often times you wind up with someone who wants more then egging on. They want actual dimensions, cut sheets, etc. That is more then a free service IMO.

[sub-standard]

Originally Posted by sandt38 Often times you wind up with someone who wants more then egging on. They want actual dimensions, cut sheets, etc. That is more then a free service IMO.

Yes, I do see what you mean. I guess if designing/building enclosures is what you do for a living then it wouldn't be right to expect someone to do that for free. But I'm not on this forum just to make money & would rather show someone how to do it the first time, so that they will have more confidence and be willing to do it thereself the second time. Now if they have little to no interest in learning for themselves, then yes, there are several people on this forum to have design, build, and ship you an enclosure (for a fee ofcourse) so that all you have to do is plug in your subs & drive.

[Duct Tape]

Originally Posted by Ami Creations Haha, fixed

and now it is really fixed

[Don Ganso]

Originally Posted by Ami Creations For those of you who do not know me here is some of my work...... http://s701.photobucket.com/albums/w...ion/Portfolio/ Please email all questions or box orders to Mike.AmiCreations@gmail.com

Wow! Thats some really nice work! Great job!

[strakele]

Email sent.

[cww180]

I would like to have someone cut, use a roundover, and send me the pieces using Birch. Obviously not for free. I have emailed amicreations with no reply, so I guess he is too busy or doesn't want my business.

[Type_X]

Originally Posted by cww180 I would like to have someone cut, use a roundover, and send me the pieces using Birch. Obviously not for free. I have emailed amicreations with no reply, so I guess he is too busy or doesn't want my business.

jasonpaul does some work, i'm not sure specifically if he does cuts for people but it's worth a shot. you can try getting him here or at powermaxelectronics.com