PDA

View Full Version : JVC CD Player


Charon
07-22-2006, 01:56 PM
Ok. So I just wired my stereo in, mounted it, all that, figuring it would work.
Well, the radio works, however the CD Player doesn't.

I'll put in a disc, the screen will say play.
Within a few seconds it will eject.
Did I wire something wrong, or is it the head unit?

Please, and thanks?

Duct Tape
07-22-2006, 05:36 PM
Ok. So I just wired my stereo in, mounted it, all that, figuring it would work.
Well, the radio works, however the CD Player doesn't.

I'll put in a disc, the screen will say play.
Within a few seconds it will eject.
Did I wire something wrong, or is it the head unit?

Please, and thanks?


its probably the head unit. the only thing you might have done wrong is jammed the cd player into the dash too tight. what you should try, is to remove the cd player from the dash, then see if the cd will play. if it does, then you need to be more careful mounting it. if it has the same problem, then you most likely need to have that cd player checked out.

Charon
07-22-2006, 07:00 PM
Well...the player wasn't in the dash when I tested it. I just hooked it in, and held onto it.
I'll go get it checked out then.
Thanks.

Duct Tape
07-22-2006, 08:22 PM
Well...the player wasn't in the dash when I tested it. I just hooked it in, and held onto it.
I'll go get it checked out then.
Thanks.


one other thing i just thought of, some cd players are shipped with a shipping screw that must be removed for the cd player to work. doubt its like that in your case, but it cant hurt to look.

Charon
07-22-2006, 09:40 PM
Where is said screw supposed to be? :P

Duct Tape
07-22-2006, 10:47 PM
it would be on the top of the unit, it also would have had a label on it saying that it needs to be removed, you probably dont have one though.